SAGA-GIS Tool Library Documentation (v7.2.0)

Tool Destriping

Destriping filter removes straight parallel stripes in raster data. It uses two low-pass filters elongated in the stripes direction; the first one is 1 pixel unit wide while the second one is wide as the striping wavelength. Their difference is the striping error which is removed from the original data to obtain the destriped DEM. This method is equivalent to that proposed by Oimoen (2000).

References:
- Oimoen, M.J. (2000): An Effective Filter For Removal Of Production Artifacts. In U.S. Geological Survey 7.5-Minute Digital Elevation Models. Proceedings of the Fourteenth International Conference on Applied Geologic Remote Sensing, 6-8 November, Las Vegas, NV.

- Perego, A. (2009): SRTM DEM destriping with SAGA GIS: consequences on drainage network extraction. online.

Parameters

 NameTypeIdentifierDescriptionConstraints
InputInputGrid (input)INPUTThis must be your input data of type grid.-
OutputDestriped GridGrid (output)RESULT3New grid filtered with the destriping1 tool-
Low-pass 1Grid (output)RESULT1Step 1: low-pass of stripe-
Low-pass 2Grid (output)RESULT2Step 2: low-pass between stripe and its surruondings-
OptionsGrid systemGrid systemPARAMETERS_GRID_SYSTEM--
Angle (in degrees)Floating pointANG0 is horizontal, 90 is vertical.Default: 0.000000
RadiusFloating pointR-Default: 10.000000
Stripes distanceFloating pointD-Default: 2.000000

Command-line

Usage: saga_cmd contrib_perego 5 [-INPUT <str>] [-RESULT3 <str>] [-RESULT1 <str>] [-RESULT2 <str>] [-ANG <double>] [-R <double>] [-D <double>]
  -INPUT:<str>  	Input
	Grid (input)
  -RESULT3:<str>	Destriped Grid
	Grid (output)
  -RESULT1:<str>	Low-pass 1
	Grid (output)
  -RESULT2:<str>	Low-pass 2
	Grid (output)
  -ANG:<double> 	Angle (in degrees)
	Floating point
	Default: 0.000000
  -R:<double>   	Radius
	Floating point
	Default: 10.000000
  -D:<double>   	Stripes distance
	Floating point
	Default: 2.000000