SAGA-GIS Tool Library Documentation (v8.4.1)

Tool Morphometric Features

Uses a multi-scale approach by fitting quadratic parameters to any size window (via least squares) to derive slope, aspect and curvatures (optional output) for subsequent classification of morphometric features (peaks, ridges, passes, channels, pits and planes). This is the method as proposed and implemented by Jo Wood (1996) in LandSerf and GRASS GIS (r.param.scale).

Optional output is described in the following. Generalised elevation is the smoothed input DEM. Slope is the magnitude of maximum gradient. It is given for steepest slope angle and measured in degrees. Aspect is the direction of maximum gradient. Profile curvature is the curvature intersecting with the plane defined by the Z axis and maximum gradient direction. Positive values describe convex profile curvature, negative values concave profile. Plan curvature is the horizontal curvature, intersecting with the XY plane. Longitudinal curvature is the profile curvature intersecting with the plane defined by the surface normal and maximum gradient direction. Cross-sectional curvature is the tangential curvature intersecting with the plane defined by the surface normal and a tangent to the contour - perpendicular to maximum gradient direction. Minimum curvature is measured in direction perpendicular to the direction of of maximum curvature. The maximum curvature is measured in any direction.

References:

Wood, J. (1996): The Geomorphological characterisation of Digital Elevation Models. Diss., Department of Geography, University of Leicester, U.K. online.

Wood, J. (2009): Geomorphometry in LandSerf. In: Hengl, T. and Reuter, H.I. [Eds.]: Geomorphometry: Concepts, Software, Applications. Developments in Soil Science, Elsevier, Vol.33, 333-349.

LandSerf Homepage.

Parameters

 NameTypeIdentifierDescriptionConstraints
InputElevationGrid, inputDEM--
OutputMorphometric FeaturesGrid, outputFEATURES--
Generalized Surface (*)Grid, output, optionalELEVATION--
Slope (*)Grid, output, optionalSLOPE--
Aspect (*)Grid, output, optionalASPECT--
Profile Curvature (*)Grid, output, optionalPROFC--
Plan Curvature (*)Grid, output, optionalPLANC--
Longitudinal Curvature (*)Grid, output, optionalLONGC--
Cross-Sectional Curvature (*)Grid, output, optionalCROSC--
Maximum Curvature (*)Grid, output, optionalMAXIC--
Minimum Curvature (*)Grid, output, optionalMINIC--
OptionsGrid SystemGrid systemPARAMETERS_GRID_SYSTEM--
Scale Radius (Cells)IntegerSIZESize of processing window (= 1 + 2 * radius) given as number of cellsMinimum: 1
Default: 5
Slope ToleranceFloating pointTOL_SLOPESlope tolerance that defines a 'flat' surface (degrees)Default: 1.000000
Curvature ToleranceFloating pointTOL_CURVECurvature tolerance that defines 'planar' surfaceDefault: 0.000100
Distance Weighting ExponentFloating pointEXPONENTExponent for distance weighting (0.0-4.0)Minimum: 0.000000
Maximum: 4.000000
Default: 0.000000
Vertical ScalingFloating pointZSCALEVertical scaling factorDefault: 1.000000
ConstrainBooleanCONSTRAINConstrain model through central window cellDefault: 0
(*) optional

Command-line

Usage: saga_cmd ta_morphometry 23 [-DEM <str>] [-FEATURES <str>] [-ELEVATION <str>] [-SLOPE <str>] [-ASPECT <str>] [-PROFC <str>] [-PLANC <str>] [-LONGC <str>] [-CROSC <str>] [-MAXIC <str>] [-MINIC <str>] [-SIZE <num>] [-TOL_SLOPE <double>] [-TOL_CURVE <double>] [-EXPONENT <double>] [-ZSCALE <double>] [-CONSTRAIN <str>]
  -DEM:<str>         	Elevation
	Grid, input
  -FEATURES:<str>    	Morphometric Features
	Grid, output
  -ELEVATION:<str>   	Generalized Surface
	Grid, output, optional
  -SLOPE:<str>       	Slope
	Grid, output, optional
  -ASPECT:<str>      	Aspect
	Grid, output, optional
  -PROFC:<str>       	Profile Curvature
	Grid, output, optional
  -PLANC:<str>       	Plan Curvature
	Grid, output, optional
  -LONGC:<str>       	Longitudinal Curvature
	Grid, output, optional
  -CROSC:<str>       	Cross-Sectional Curvature
	Grid, output, optional
  -MAXIC:<str>       	Maximum Curvature
	Grid, output, optional
  -MINIC:<str>       	Minimum Curvature
	Grid, output, optional
  -SIZE:<num>        	Scale Radius (Cells)
	Integer
	Minimum: 1
	Default: 5
  -TOL_SLOPE:<double>	Slope Tolerance
	Floating point
	Default: 1.000000
  -TOL_CURVE:<double>	Curvature Tolerance
	Floating point
	Default: 0.000100
  -EXPONENT:<double> 	Distance Weighting Exponent
	Floating point
	Minimum: 0.000000
	Maximum: 4.000000
	Default: 0.000000
  -ZSCALE:<double>   	Vertical Scaling
	Floating point
	Default: 1.000000
  -CONSTRAIN:<str>   	Constrain
	Boolean
	Default: 0