SAGA 9.4.2 | Tool Library Documentation

Direct Georeferencing of Airborne Photographs


Description

Direct georeferencing of aerial photographs uses extrinsic (position, altitude) and intrinsic (focal length, physical pixel size) camera parameters. Orthorectification routine supports additional data from a Digital Elevation Model (DEM).


References


Parameters

 NameTypeIdentifierDescriptionConstraints
InputUnreferenced Gridsgrid list, inputINPUT--
Elevationgrid, input, optionalDEM--
Target Systemgrid, input, optional, CMDTARGET_TEMPLATEuse this grid's system for output grids-
OutputReferenced Gridsgrid list, outputOUTPUT--
Extentshapes, output, optionalEXTENT--
OptionsGrid Systemgrid systemPARAMETERS_GRID_SYSTEM--
Grid systemgrid systemDEM_GRIDSYSTEM--
Defaultfloating point numberDEM_DEFAULTdefault value if no grid has been selectedDefault: 0.000000
Focal Length [mm]floating point numberCFL-Minimum: 0.000000 Default: 80.000000
CCD Physical Pixel Size [micron]floating point numberPXSIZE-Minimum: 0.000000 Default: 5.200000
Xfloating point numberX-Default: 0.000000
Yfloating point numberY-Default: 0.000000
Zfloating point numberZ-Default: 1000.000000
Omegafloating point numberOMEGAX axis rotation angle [degree] (roll)Default: 0.000000
Phifloating point numberPHIY axis rotation angle [degree] (pitch)Default: 0.000000
Kappafloating point numberKAPPAZ axis rotation angle [degree] (heading)Default: 0.000000
Offsetfloating point numberKAPPA_OFForigin adjustment angle [degree] for kappa (Z axis, heading)Default: 90.000000
OrientationchoiceORIENTATION-Available Choices: [0] BLUH [1] PATB Default: 0
Row OrderchoiceROW_ORDER-Available Choices: [0] top down [1] bottom up Default: 0
ResamplingchoiceRESAMPLING-Available Choices: [0] Nearest Neighbour [1] Bilinear Interpolation [2] Bicubic Spline Interpolation [3] B-Spline Interpolation Default: 3
Data Typedata typeDATA_TYPE-Available Choices: [0] unsigned 1 byte integer [1] signed 1 byte integer [2] unsigned 2 byte integer [3] signed 2 byte integer [4] unsigned 4 byte integer [5] signed 4 byte integer [6] unsigned 8 byte integer [7] signed 8 byte integer [8] 4 byte floating point number [9] 8 byte floating point number [10] same as original Default: 10
Target Grid SystemchoiceTARGET_DEFINITION-Available Choices: [0] user defined [1] grid or grid system Default: 0
Cellsizefloating point numberTARGET_USER_SIZE-Minimum: 0.000000 Default: 1.000000
Westfloating point numberTARGET_USER_XMIN-Default: 0.000000
Eastfloating point numberTARGET_USER_XMAX-Default: 100.000000
Southfloating point numberTARGET_USER_YMIN-Default: 0.000000
Northfloating point numberTARGET_USER_YMAX-Default: 100.000000
Columnsinteger numberTARGET_USER_COLSNumber of cells in East-West direction.Minimum: 1 Default: 101
Rowsinteger numberTARGET_USER_ROWSNumber of cells in North-South direction.Minimum: 1 Default: 101
FitchoiceTARGET_USER_FITS-Available Choices: [0] nodes [1] cells Default: 0
Grid Systemgrid systemTARGET_SYSTEM--

Command Line


Usage: saga_cmd pj_georeference 4 [-INPUT ] [-OUTPUT ] [-EXTENT ] [-DEM ] [-DEM_DEFAULT ] [-CFL ] [-PXSIZE ] [-X ] [-Y ] [-Z ] [-OMEGA ] [-PHI ] [-KAPPA ] [-KAPPA_OFF ] [-ORIENTATION ] [-ROW_ORDER ] [-RESAMPLING ] [-DATA_TYPE ] [-TARGET_DEFINITION ] [-TARGET_USER_SIZE ] [-TARGET_USER_XMIN ] [-TARGET_USER_XMAX ] [-TARGET_USER_YMIN ] [-TARGET_USER_YMAX ] [-TARGET_USER_COLS ] [-TARGET_USER_ROWS ] [-TARGET_USER_FITS ] [-TARGET_TEMPLATE ]
  -INPUT:              	Unreferenced Grids
	grid list, input
  -OUTPUT:             	Referenced Grids
	grid list, output
  -EXTENT:             	Extent
	shapes, output, optional
  -DEM:                	Elevation
	grid, input, optional
  -DEM_DEFAULT:     	Default
	floating point number
	Default: 0.000000
  -CFL:             	Focal Length [mm]
	floating point number
	Minimum: 0.000000
	Default: 80.000000
  -PXSIZE:          	CCD Physical Pixel Size [micron]
	floating point number
	Minimum: 0.000000
	Default: 5.200000
  -X:               	X
	floating point number
	Default: 0.000000
  -Y:               	Y
	floating point number
	Default: 0.000000
  -Z:               	Z
	floating point number
	Default: 1000.000000
  -OMEGA:           	Omega
	floating point number
	Default: 0.000000
  -PHI:             	Phi
	floating point number
	Default: 0.000000
  -KAPPA:           	Kappa
	floating point number
	Default: 0.000000
  -KAPPA_OFF:       	Offset
	floating point number
	Default: 90.000000
  -ORIENTATION:        	Orientation
	choice
	Available Choices:
	[0] BLUH
	[1] PATB
	Default: 0
  -ROW_ORDER:          	Row Order
	choice
	Available Choices:
	[0] top down
	[1] bottom up
	Default: 0
  -RESAMPLING:         	Resampling
	choice
	Available Choices:
	[0] Nearest Neighbour
	[1] Bilinear Interpolation
	[2] Bicubic Spline Interpolation
	[3] B-Spline Interpolation
	Default: 3
  -DATA_TYPE:          	Data Type
	data type
	Available Choices:
	[0] unsigned 1 byte integer
	[1] signed 1 byte integer
	[2] unsigned 2 byte integer
	[3] signed 2 byte integer
	[4] unsigned 4 byte integer
	[5] signed 4 byte integer
	[6] unsigned 8 byte integer
	[7] signed 8 byte integer
	[8] 4 byte floating point number
	[9] 8 byte floating point number
	[10] same as original
	Default: 10
  -TARGET_DEFINITION:  	Target Grid System
	choice
	Available Choices:
	[0] user defined
	[1] grid or grid system
	Default: 0
  -TARGET_USER_SIZE:	Cellsize
	floating point number
	Minimum: 0.000000
	Default: 1.000000
  -TARGET_USER_XMIN:	West
	floating point number
	Default: 0.000000
  -TARGET_USER_XMAX:	East
	floating point number
	Default: 100.000000
  -TARGET_USER_YMIN:	South
	floating point number
	Default: 0.000000
  -TARGET_USER_YMAX:	North
	floating point number
	Default: 100.000000
  -TARGET_USER_COLS:   	Columns
	integer number
	Minimum: 1
	Default: 101
  -TARGET_USER_ROWS:   	Rows
	integer number
	Minimum: 1
	Default: 101
  -TARGET_USER_FITS:   	Fit
	choice
	Available Choices:
	[0] nodes
	[1] cells
	Default: 0
  -TARGET_TEMPLATE:    	Target System
	grid, input, optional, CMD