SAGA 9.4.2 | Tool Library Documentation

IHACRES Version 1.0


Description

The Rainfall-Runoff Model IHACRES Reference: Jakeman, A.J. / Hornberger, G.M. (1993). How Much Complexity Is Warranted in a Rainfall-Runoff Model? Water Resources Research, (29), NO. 8 (2637-2649) Croke, B. F. W. et al.(2004). A dynamic model for predicting hydrologic response to land cover changes in gauged and ungauged catchments. Journal Of Hydrology 291(1-2): 115-131.


Parameters

 NameTypeIdentifierDescriptionConstraints
InputTabletable, inputTABLE--
OutputTabledata object Table, output, optionalTABLEout--
Tabledata object Table, output, optionalTABLEparms--
Tabledata object Table, output, optionalTABLEsettings--
OptionsDate Columntable fieldDATE_FieldSelect the column containing the Date-
Streamflow Columntable fieldDISCHARGE_FieldSelect the Column containing Discharge Values-
Precipitation Columntable fieldPCP_FieldSelect the Column containing precipitation Values-
Temperature Columntable fieldTMP_FieldSelect the Column containing Temperature Values-
Using temperature data?booleanUSE_TMPIf checked, then temperature data are used.Default: 1
Area of the Watershed in [km2]floating point numberAREAArea of the Watershed in [km2] used for unit conversionMinimum: 0.000010 Default: 100.000000
Parameter (c)floating point numberCFACParameter (c) to fit streamflow volumeMinimum: 0.000000 Maximum: 1.000000 Default: 0.001000
(Tw) wetness decline time constantfloating point numberTwFACTw is approximately the time constant, or inversely,the rate at which the catchment wetness declines in the absence of rainfallMinimum: 0.010000 Maximum: 150.000000 Default: 1.000000
StoragechoiceSTORAGE-Available Choices: [0] Single Storage [1] Two Parallel Storages [2] Two Storages in Series !!! not yet implemented !!! Default: 0
IHACRES VersionchoiceIHACVERS-Available Choices: [0] Jakeman & Hornberger (1993) [1] Croke et al. (2005) Default: 0
Using the snow-melt module?booleanSNOW_TOOLIf checked, snow-melt module is used.Default: 0
Write all calculated Time Series in a table?booleanWRITEALL_TSIf checked, then a second output table with all Time Series data is created.Default: 1

Command Line


Usage: saga_cmd sim_ihacres 1 [-TABLE ] [-DATE_Field ] [-DISCHARGE_Field ] [-PCP_Field ] [-TMP_Field ] [-USE_TMP ] [-AREA ] [-CFAC ] [-TwFAC ] [-STORAGE ] [-IHACVERS ] [-SNOW_TOOL ] [-WRITEALL_TS ] [-TABLEout ] [-TABLEparms ] [-TABLEsettings ]
  -TABLE:          	Table
	table, input
  -DATE_Field:     	Date Column
	table field
  -DISCHARGE_Field:	Streamflow Column
	table field
  -PCP_Field:      	Precipitation Column
	table field
  -TMP_Field:      	Temperature Column
	table field
  -USE_TMP:        	Using temperature data?
	boolean
	Default: 1
  -AREA:        	Area of the Watershed in [km2]
	floating point number
	Minimum: 0.000010
	Default: 100.000000
  -CFAC:        	Parameter (c)
	floating point number
	Minimum: 0.000000
	Maximum: 1.000000
	Default: 0.001000
  -TwFAC:       	(Tw) wetness decline time constant
	floating point number
	Minimum: 0.010000
	Maximum: 150.000000
	Default: 1.000000
  -STORAGE:        	Storage
	choice
	Available Choices:
	[0] Single Storage
	[1] Two Parallel Storages
	[2] Two Storages in Series !!! not yet implemented !!!
	Default: 0
  -IHACVERS:       	IHACRES Version
	choice
	Available Choices:
	[0] Jakeman & Hornberger (1993)
	[1] Croke et al. (2005)
	Default: 0
  -SNOW_TOOL:      	Using the snow-melt module?
	boolean
	Default: 0
  -WRITEALL_TS:    	Write all calculated Time Series in a table?
	boolean
	Default: 1
  -TABLEout:       	Table
	data object Table, output, optional
  -TABLEparms:     	Table
	data object Table, output, optional
  -TABLEsettings:  	Table
	data object Table, output, optional